![\"Control](\"https:\/\/www.theforcegroup.co.uk\/valve-force\/wp-content\/uploads\/sites\/2\/2022\/11\/controlvalves-steamplant.jpg\" "\\"Control,Valve,Steam,Line,In,Power,Plant.\\"")
<\/a> <\/a> <\/a><\/p>\r\nSpeak with our experts<\/h2>\r\n
Fill out our quick and easy contact form with your enquiry and we’ll get back to you.<\/p>\r\n
Safety Valves Benefits<\/h2>\r\n
Safety valves are an important part of any closed system. They provide protection against overpressure, which can damage equipment or cause injuries to personnel. Additionally, safety valves can help to maintain the quality of a product by preventing sudden changes in pressure. When choosing a safety valve, it is important to consider the set point, reset pressure, flow capacity, and temperature and pressure rating. WRAS-approved safety valves are also available for use in potable water applications.<\/p>\r\n
Valveforce<\/a> are specialist in the design, specification and supply of high-quality industrial valves & actuators. If you’re looking for more information on Safety Valves or any of our other products or services, please don’t hesitate to get in touch.<\/p>\r\n Call us on 0121 711 1908 <\/b> <\/a><\/p>\r\n A Safety Valve opens from a set pressure to relieve overpressures in a closed system. It is the last line of defence against excessive pressure and must be able to open quickly and reliably when needed. Safety Valves are usually spring-loaded so that they can open automatically when the preset pressure is reached.<\/p>\r\n Safety valves only have mechanical parts that are in contact with the process fluid. This means that there is no chance of contamination of the product by the valve itself.<\/p>\r\n A Safety Valve is a device that is installed in a closed system to relieve overpressures. It is the last line of defence against excessive pressure and, therefore must be able to open quickly and reliably when needed. Safety Valves are usually spring-loaded so that they can open automatically when the preset pressure is reached.<\/p>\r\n When the system pressure reaches the set point of the Safety Valve, the valve will open and allow excess pressure to be relieved from the system. Once the pressure has been relieved, the safety valve will close again. This prevents the system from depressurising too quickly, which could cause damage to equipment or personnel.<\/p>\r\n Relief Valves are the most common type of Safety Valve. They are used to protect equipment from overpressures by relieving excess pressure from the system. Relief valves can be either direct-acting or pilot-operated.<\/p>\r\n Safety Relief Valves are similar to relief valves but with an additional feature that allows them to close automatically when the overpressure has been relieved. This prevents the system from depressurising too quickly, which could cause damage to equipment or personnel.<\/p>\r\n Pop Safety Valves are a type of Relief Valve that is opened by a sudden increase in pressure. They are often used in applications where it is not possible to install a traditional Relief Valve.<\/p>\r\n Bursting Discs are a type of Safety Valve that is designed to rupture at a predetermined pressure. They are often used in applications where it is not possible or practical to install a traditional relief valve.<\/p>\r\n High-Performance Full lift Safety Valves are designed for use in high-pressure applications. They are able to provide reliable protection against overpressure while also ensuring that the system does not depressurise too quickly.<\/p>\r\n Modulating Action Safety Valves are designed for use in applications where it is important to maintain constant product quality. They can modulate the relief of pressure in order to prevent sudden changes in product quality.<\/p>\r\n Pilot-Operated Safety Valves are often used in applications where it is not possible to install a traditional Relief Valve. They can provide reliable protection against overpressure while also ensuring that the system does not depressurise too quickly.<\/p>\r\n WRAS, which stands for Water Regulations Advisory Scheme, is a UK-based certification that shows that a product meets the necessary standards for use in potable water applications. WRAS-approved safety valves are designed for use in applications where it is important to maintain the quality of the water supply.<\/p>\r\n Set Pressure:<\/strong> The set pressure is the pressure at which the Safety Valve will open and relieve pressure from the system. It is important to choose a set point that is high enough to protect equipment from overpressure but not so high that it causes frequent false trips.<\/p>\r\n Flow Capacity:<\/strong> The flow capacity of a safety valve is the maximum amount of fluid that can be discharged through the valve in a given period of time. It is important to choose a valve with sufficient flow capacity for the application.<\/p>\r\n Reset Pressure:<\/strong> The reset pressure is the pressure at which the Safety Valve will close after it has opened. It is important to choose a reset point that is high enough to protect equipment from overpressure, but not so high that it causes frequent false trips.<\/p>\r\n Temperature and Pressure Rating:<\/strong> The temperature and pressure rating of a Safety Valve is the maximum temperature and pressure that the valve can safely handle. It is important to choose a valve with a rating that exceeds the maximum operating conditions of the system.<\/p>\r\n Call us on 0121 711 1908 <\/b> <\/a><\/p>\r\n The High Performance product group represents<\/strong><\/p>\r\n LESERs High Performance Safety Valves<\/strong><\/p>\r\n Furthermore, all LESER High Performance safety valves are designed, marked, produced and approved acc. to the requirements of the following regulations (directives, codes, rules and standards).<\/p>\r\n EN ISO 4126-7, EN 12266-1\/-2, EN 1092 Teil I and II flanging,<\/strong> Download <\/a><\/p>\r\n The Modulate Action product group stands for<\/strong><\/p>\r\n LESER Modulate Action Safety Valves<\/strong><\/p>\r\n Furthermore, all LESER Modulate Action safety valves are designed, marked, produced and approved according Download <\/a><\/p>\r\n The NABIC 500<\/strong> is designed primarily for use on unvented hot water heating systems, where a high capacity, emergency steam relief capability is required.<\/p>\r\n All wetted parts are manufactured from dezincification resistance materials. Designed and tested to BS EN ISO 4126 -1<\/strong>. WRAS approved (1 bar and above).<\/strong><\/p>\r\n Download <\/a><\/p>\r\n For more information,<\/b><\/p>\r\n Access our free brochure<\/b><\/p>\r\n Click Here to View <\/a> For more information,<\/b><\/p>\r\n Watch our s<\/b>hort film<\/b><\/p>\r\n A Safety Valve is a device that is fitted to a pressurised system in order to release pressure should it exceed the safe limit. In industrial and manufacturing settings, these valves are critical for protecting both equipment and personnel. There are many different types of safety valves available on the market, each with its own…<\/p>\n","protected":false},"author":2,"featured_media":264,"parent":0,"menu_order":24,"comment_status":"closed","ping_status":"open","template":"","meta":{"_acf_changed":false,"footnotes":""},"page_categories":[],"acf":[],"_links":{"self":[{"href":"https:\/\/www.theforcegroup.co.uk\/valve-force\/wp-json\/wp\/v2\/pages\/263"}],"collection":[{"href":"https:\/\/www.theforcegroup.co.uk\/valve-force\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.theforcegroup.co.uk\/valve-force\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.theforcegroup.co.uk\/valve-force\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.theforcegroup.co.uk\/valve-force\/wp-json\/wp\/v2\/comments?post=263"}],"version-history":[{"count":34,"href":"https:\/\/www.theforcegroup.co.uk\/valve-force\/wp-json\/wp\/v2\/pages\/263\/revisions"}],"predecessor-version":[{"id":3380,"href":"https:\/\/www.theforcegroup.co.uk\/valve-force\/wp-json\/wp\/v2\/pages\/263\/revisions\/3380"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.theforcegroup.co.uk\/valve-force\/wp-json\/wp\/v2\/media\/264"}],"wp:attachment":[{"href":"https:\/\/www.theforcegroup.co.uk\/valve-force\/wp-json\/wp\/v2\/media?parent=263"}],"wp:term":[{"taxonomy":"page_categories","embeddable":true,"href":"https:\/\/www.theforcegroup.co.uk\/valve-force\/wp-json\/wp\/v2\/page_categories?post=263"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}Safety Valves Explained<\/h2>\r\n
What are Safety Valves?<\/h2>\r\n
How Does a Safety Valve Work?<\/h2>\r\n
Types of Safety Valve<\/h2>\r\n
Relief Valves<\/h3>\r\n
Safety Relief Valves<\/h3>\r\n
Pop Safety Valves<\/h3>\r\n
Bursting Discs<\/h3>\r\n
High-Performance Full Lift Safety Valves<\/h3>\r\n
Modulating Action Safety Valves<\/h3>\r\n
Pilot-Operated Safety Valves<\/h3>\r\n
WRAS Approved Safety Valves<\/h3>\r\n
Choosing the Right Safety Valve<\/h2>\r\n
Valveforce Safety Relief Valves<\/h2>\r\n
High Performance Safety Relief Valves<\/h3>\r\n
\r\n
\r\n
lift.<\/li>\r\n
the maximum mass flow has to be discharged rapidly.<\/li>\r\n
gas service and minus 20 % for liquid service.<\/li>\r\n
worldwide.<\/li>\r\n
ASME PTC 25, ASME-Code Sec. II, ASME B16.34 and ASME<\/strong>
B16.5-flanging, API Std. 527, API RP 576,<\/strong>
AD 2000-Merkblatt A4, AD 2000-Merkblatt HP0.<\/strong> <\/p>\r\nTechnical Data Sheet<\/h3>\r\n
Modulate Action Safety Relief Valves<\/h3>\r\n
\r\n
especially thermal expansion<\/li>\r\n\r\n
to the requirements of the following regulations (directives, codes, rules and standards): EN ISO 4126-7, EN 12266-1\/-2,<\/strong>
EN 1092 Part I and II Flange, ASME B 16.34 and ASME<\/strong>
B16.5- Flange, AD 2000-Merkblatt A4, AD 2000-Merkblatt HP0.<\/strong> <\/p>\r\nTechnical Data Sheet<\/h3>\r\n
WRAS Approved Safety Valves<\/h3>\r\n
\r\n
degree of seat tightness<\/li>\r\n<\/p>\r\nTechnical Data Sheet<\/h3>\r\n
<\/a><\/p>\r\n <\/p>\r\n","protected":false},"excerpt":{"rendered":"