Steel Finned Steam & HPHW Batteries

For air heating applications where the primary heat source is steam or high pressure hot water (HPHW), it is necessary to construct heater batteries which can cope with elevated pressures and temperatures where copper coils can’t.

Heatxforce manufacture fully welded heater batteries from steel or stainless steel, using individually finned tubes with aluminium, copper or steel fins.

Each battery is thermally and mechanically designed for the specific application required. Other applications for this type of construction include thermal fluid heaters, heat recovery units and air blast coolers and condensers.

Fully welded construction means that there are fewer joints and potential leakage paths to worry about. Our welders are qualified to ASME and BSEN standards, and where the construction falls within the scope of the European Pressure Directive, we are able to construct in accordance with PD5500 and ASME VIII pressure vessel codes.

In multi-row batteries, the tubes are welded to the tube sheets, then lightly expanded to provide a strong pressure tight joint. Single row batteries are usually made with drilled headers made from pipe with the finned tubes welded in between. For steam applications, it is usual to have a vertical tube configuration, as this improves the steam and condensate flows. Horizontal tubes are sometimes used, but this generally requires an internal partition or a slight fall to aid condensate flow and prevent steam hammer.

Hot water batteries are usually multi pass, which means that the flow is through only a few tubes at a time, and this helps to maximise the transfer of heat. With steam, the vapour flow through all of the tubes, condensing as it goes before draining as a liquid through the condensate outlet.

Please call Heatxforce on 0121 783 8676 to discuss your requirements, we would be happy to help.

Steam Finned Steam Heater Batteries

Steel Tube/ Aluminium Finned Steam Heater Batteries constructed to pressure vessel code PD5500.

Heatxforce Steam Battery Welding

Steel Tube/ Aluminium Finned Steam Heater Batteries during construction to pressure vessel code PD5500.

Heatxdownloads

Download the latest Heatxforce brochure here

For more information,

Download our
free brochure

Hot Water Packages & SKID Fabrication

Calorifier & Coils Build & Repair

Heatxforce build pressure equipment in accordance with PD5500 and ASME VIII Pressure vessel codes whilst conforming to the European Pressure Equipment Directive (PED) and UKCA Pressure Equipment Safety Regulations (PESR), which are mandatory inspection requirements applicable to pressure vessels and systems.

Our welding procedures are in accordance with ISO 15614-1 and ASME IX.

Welder qualifications are in accordance with ISO 9606-1 and ASME IX.

All of our welding related qualifications are certified by TUV Nord.

Ukca